NZ Auckland Island Sand Polygons (Topo, 1:50k)
Sand: crushed rock, shells etc smaller than 2mm in size
Data Dictionary for sand_poly: https://docs.topo.linz.govt.nz/data-dictionary/tdd-class-sand_poly.html
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.
Further information on Topo50:
Simple
Identification info
- Date (Creation)
- 2011
- Purpose
-
Permits may be required to visit some sensitive and special islands. Contact the Department of Conservation to see if you need to apply for a permit.
When using Topo50 data, please be aware of the following:
1. The existence of a road or track does not necessarily indicate public right of access.
2. The Department of Conservation should be contacted for the latest information on tracks and huts.
3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.
4. Contours and spot elevations in forest and snow areas may be less accurate.
- Status
- On going
- Point of contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
- Spatial representation type
- Vector
Spatial resolution
Equivalent scale
- Denominator
- 50000
- Topic category
-
- Imagery base maps earth cover
Extent
![](https://geodata.nz/geonetwork/srv/api/regions/geom.png?geomsrs=EPSG:4326&geom=POLYGON((166.322923554%20-50.86623092,166.322923554%20-50.4990799529,165.933098535%20-50.4990799529,165.933098535%20-50.86623092,166.322923554%20-50.86623092)))
- Maintenance and update frequency
- As needed
Resource format
- Title
-
*.xml
- Date
- Edition
-
Unknown
- ANZLIC Jurisdictions
-
-
New Zealand
-
Resource constraints
- Classification
- Unclassified
Resource constraints
- Use limitation
-
Copyright 2011 Crown copyright (c)
Toitū Te Whenua Land Information New Zealand and the New Zealand Government.
All rights reserved
- Use constraints
- Copyright
Resource constraints
- Use limitation
-
Released under Creative Commons Attribution 4.0 International with:
Following Disclaimers:
1. The existence of a road or track does not necessarily indicate public right of access.
2. The Department of Conservation should be contacted for the latest information on tracks and huts.
3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.
4. Contours and spot elevations in forest and snow areas may be less accurate.
5. Permits may be required to visit some sensitive and special islands. Contact the Department of Conservation to see if you need to apply for a permit
Following Attribution:
If you publish, distribute or otherwise disseminate this work to the public without adapting it, the following attribution to Toitū Te Whenua Land Information New Zealand should be used:
'CC BY 4.0 Toitū Te Whenua Land Information New Zealand'
If you adapt this work in any way or include it in a collection, and publish, distribute or otherwise disseminate that adaptation or collection to the public, the following attribution to Toitū Te Whenua Land Information New Zealand should be used:
'Contains data sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0.'
If 'attribution stacking' problems exist then the requirement to display the above attribution statements is waived and in lieu the attribution statement is to be made in any terms or conditions associated with the work/ product/ application/ etc.
- Use constraints
- License
- Language
- English
- Character encoding
- UTF8
Resource lineage
- Statement
-
LINZ and our predecessors have been responsible for national topographic mapping in New Zealand for more than a hundred years.
The first digital data at 1:50,000 was created in the late 80's and early 90's by scanning the 1:50,000 maps that existed at the time (known as the NZMS 260 series, which replaced the imperial NZMS 1 series at 1inch to 1 mile)
The raw data was created by photogrammetrists who from 1974 to 1997 mapped the country from overlapping pairs of aerial photographs. Cartographers then took the data and added symbols and text, and created the colour separations needed to produce the printed maps.
In 2009 and 2010 LINZ used satellite imagery (KiwImage) and data supplied from the Department of Conservation to update the offshore islands data. Printed maps (in hardcopy and digital form) in are also available.
- Hierarchy level
- Dataset
- Other
-
dataset
Metadata constraints
- Classification
- Unclassified
Metadata constraints
- Use limitation
-
Copyright 2011 Crown copyright (c)
Toitū Te Whenua Land Information New Zealand and the New Zealand Government.
All rights reserved
- Use constraints
- Copyright
Metadata constraints
- Use limitation
-
Released under Creative Commons Attribution 4.0 International
- Use constraints
- License
Metadata
- Metadata identifier
- fba98da0-35a2-f8b9-37cf-307408b4a8ef
- Language
- English
- Character encoding
- UTF8
- Contact
-
Role Organisation Electronic mail address Resource provider Toitū Te Whenua Land Information New Zealand
Type of resource
- Resource type
- Dataset
- Name
-
dataset
- Date info (Revision)
- 2014-05-22
Metadata standard
- Title
-
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
- Edition
-
1.1