Hawke's Bay LiDAR 1m DSM (2023)
This layer contains the DSM for LiDAR data in the Hawke's Bay Region, captured between 20 September to 21 December 2023.
- The DEM is available as layer [Hawke's Bay LiDAR 1m DEM (2023)]( https://data.linz.govt.nz/layer/1187 55).
- The Index Tiles are available as layer [Hawke's Bay LiDAR Index Tiles (2023)]( https://data.linz.govt.nz/layer/1187 53).
- The LAS Point Cloud is available as layer [Hawke's Bay LiDAR Point Cloud (2023)]( https://data.linz.govt.nz/layer/d3Sfpb7TW63wByN ).
LiDAR was captured for The National Institute of Water and Atmospheric Research Limited (NIWA) by Woolpert Ltd between 20 September to 21 December 2023. These datasets were generated by Woolpert and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.
Data comprises:
- DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
Pulse density specification is at a minimum of 8 pulses/square metre.
Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)
Vertical datum is NZVD2016.
Simple
Identification info
- Date (Creation)
- 2023-09-20
- Status
- On going
- Point of contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
- Spatial representation type
- Grid
Spatial resolution
Equivalent scale
- Denominator
- 1000
- Topic category
-
- Elevation
Extent
- Geographic identifier
-
nzl
- Title
-
ANZMet Lite Country codelist
- Date (Publication)
- 2009-03-31
- Edition
-
Version 1.0
- Edition date
- 2009-03-31
- Citation identifier
- http://asdd.ga.gov.au/asdd/profileinfo/anzlic-country.xml#Country
- Cited responsible party
-
Role Organisation Electronic mail address Custodian ANZLIC the Spatial Information Council
Extent
![](https://geodata.nz/geonetwork/srv/api/regions/geom.png?geomsrs=EPSG:4326&geom=POLYGON((177.192211470558%20-40.02896624661123,177.192211470558%20-38.98580180436963,176.03664278319235%20-38.98580180436963,176.03664278319235%20-40.02896624661123,177.192211470558%20-40.02896624661123)))
- Maintenance and update frequency
- Irregular
Resource format
- Title
-
*.xml
- Date
- Edition
-
Unknown
- ANZLIC Jurisdictions
-
-
New Zealand
-
Resource constraints
- Use limitation
-
Copyright in this work is owned by NIWA
© NIWA
- Use constraints
- Copyright
Resource constraints
- Use limitation
-
Released by Toitū Te Whenua Land Information New Zealand under Creative Commons Attribution 4.0 New Zealand (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed by NIWA, for re-use under CC BY 4.0."
For details see: https://www.linz.govt.nz/data/licensing-and-using-data/attributing-elevation-or-aerial-imagery-data
- Use constraints
- License
Resource constraints
- Classification
- Unclassified
- Language
- English
- Character encoding
- UTF8
Resource lineage
- Statement
-
Airborne Laser Scanner (ALS) data was acquired from a fixed wing aircraft between 20 September 2023 to 21 December 2023, using Woolpert's Leica Terrain Mapper 527 laser scanner.
Survey Specification:
- Scanner: Leica Terrain Mapper-2
- Flying height: 2100m AMGL
- Scan angle: 40 degrees
- Pulse rate: 1700 kHz
- Swath overlap: 25%
- Swath points per M^2: 8
Sounds Surveying Ltd undertook field survey for this project, collecting Check sites to validate the accuracy of the LiDAR data and derivative products. Ground data in this volume has been compared to 2760 test points obtained by field survey and assumed to be error‐free. The test points were distributed in 62 groups across the mapping area and located on clear ground. Comparison of the test points with elevations interpolated from measured data resulted in:
Standard Deviation: 0.034m
RMS: 0.035m
Average Difference: 0.006m
Classification of the point cloud follows the classification scheme below:
1 - Unclassified
2 - Ground
3 - Low Vegetation
4 - Medium Vegetation
5 - High Vegetation
6 - Buildings
7 - Low Noise
9 - Water
17 - Bridge Deck
18 - High Noise
DEM comparisons were made between adjacent blocks to ensure consistency, blocks were found to align within 0.023m. A shift of ‐0.127 was applied to the data before testing against the check points to produce the results shown above. Horizontal Accuracy – the LiDAR data was compared to visible horizontal control using the intensity imagery. The data was found to fit well. The expected horizontal accuracy at 95% CI is 38cm, within the specification of 100cm. Data classification has been manually checked and edited against available imagery.
The deliverables to LINZ were:
1m gridded bare earth digital elevation model (DEM)
1m gridded digital surface model (DSM)
Classified point cloud
All product deliverables supplied in terms of NZTM map projection and NZVD2016 vertical datum.
- Hierarchy level
- Dataset
- Other
-
dataset
Reference System Information
- Reference system identifier
- 2193
Metadata constraints
- Use limitation
-
Copyright of this work is owned by Toitū Te Whenua Land Information New Zealand
© LINZ
- Use constraints
- Copyright
Metadata constraints
- Use limitation
-
Released by Toitū Te Whenua Land Information New Zealand under Creative Commons Attribution 4.0 International (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0"
For details see https://www.linz.govt.nz/data/licensing-and-using-data/attributing-linz-data
- Use constraints
- License
Metadata
- Metadata identifier
- cf3ea050-6c09-acb1-c576-14c842daa0b4
- Language
- English
- Character encoding
- UTF8
- Contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
Type of resource
- Resource type
- Dataset
- Name
-
dataset
- Date info (Revision)
- 2024-05-21
Metadata standard
- Title
-
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
- Edition
-
1.1