Otago - Queenstown LiDAR 1m DSM (2016)
This layer contains the DSM for LiDAR data from the Queenstown Area in the Otago Region captured in 2016.
- The DEM is available as layer [Otago - Queenstown LiDAR 1m DEM (2016)]( https://data.linz.govt.nz/layer/99115-otago-queenstown-lidar-1m-dem-2016/ ).
- The index tiles are available as layer [Otago - Queenstown LiDAR Index Tiles (2016)]( https://data.linz.govt.nz/layer/99121-otago-queenstown-lidar-index-tiles-2016/ ).
- The LAS point cloud and vendor project reports are available from [OpenTopography]( https://portal.opentopography.org/datasets?loc=New%20Zealand ).
Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.
Data comprises:
- DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
Pulse density is 2 pulses/square metre.
Vertical accuracy specification is +/- 0.044m (95%).
Vertical datum is NZVD2016.
Simple
Identification info
- Date (Creation)
- 2016-03-02
- Status
- Completed
- Point of contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
- Spatial representation type
- Grid
Spatial resolution
Equivalent scale
- Denominator
- 1000
- Topic category
-
- Elevation
Extent
![](https://geodata.nz/geonetwork/srv/api/regions/geom.png?geomsrs=EPSG:4326&geom=POLYGON((168.934228799%20-45.1407984284,168.934228799%20-44.9185473841,168.605137516%20-44.9185473841,168.605137516%20-45.1407984284,168.934228799%20-45.1407984284)))
- Maintenance and update frequency
- Not planned
Resource format
- Title
-
*.xml
- Date
- Edition
-
Unknown
- ANZLIC Jurisdictions
-
-
New Zealand
-
Resource constraints
- Classification
- Unclassified
Resource constraints
- Use limitation
-
Copyright in this work is owned by Otago Regional Council
© Otago Regional Council
- Use constraints
- Copyright
Resource constraints
- Use limitation
-
Released by LINZ under Creative Commons Attribution 4.0 New Zealand (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed by Otago Regional Council, for re-use under CC BY 4.0."
For details see: https://www.linz.govt.nz/data/licensing-and-using-data/attributing-elevation-or-aerial-imagery-data
- Use constraints
- License
- Language
- English
- Character encoding
- UTF8
Resource lineage
- Statement
-
Data Acquisition:
Airborne Laser Scanner (ALS) data was acquired from a fixed wing aircraft on:
2nd, 4th, 5th, 6th, 18th, 19th March and 21st April 2016 using Aerial Surveys OptechOrion H300 LiDAR system.
Survey Specifications:
• Scanner: Optech Orion H300
• Flying Height: 2100m AMGL
• Scan Angle: ±22 degrees
• Scan Frequency: 48Hz
• Pulse Rate: 125kHz
• Swath Overlap: 30%
• Points Per M2: 2.06
Data processing:
The LiDAR sensor positioning and orientation (POS) was determined using the collected
GPS/IMU datasets and Applanix POSPac software.
Benchmark 1: VZQN (Queenstown Glenda) OWNER: Geosystems
Base Station Position: -45 00 34.77762 S 168 45 11.54995 E 373.521 Ell Ht
Antenna Height: 0.085 Phase Center
Benchmark 2: GSQU OWNER: Global
Base Station Position: -44 58 31.16085 S 168 45 52.01762 E 384.4
Antenna Height: 0.000 Phase Centre
The POS data was combined with the LiDAR range files and used to generate LIDAR point clouds in NZTM and ellipsoidal heights. This process was undertaken using Optech LMS LiDAR processing software. The data was checked for completeness of coverage. The relative fit of data in the overlap between strips was also checked.
The height accuracy of the ground classified LiDAR points was checked using open land-cover survey check site data collected by Sounds Surveying Ltd. This was done by calculating height differences statistics between a TIN of the LiDAR ground points and the checkpoints. The standard deviation statistic is 0.022m; a RMS of 0.023m and the average difference is 0.006m. LiDAR is relative to the control check points.
The positional accuracy of the LiDAR data has been checked by overlaying Sounds Surveying Ltd surveyed data over the LiDAR data displayed coded by intensity. The data was found to fit well in position.
The point cloud data was then classified withTerraSolid LiDAR processing software into ground and above ground returns using automated routines tailored to the project landcover and terrain.
All product deliverables are supplied in terms of NZTM map projection.
For the classification scheme of the point cloud please refer to the original survey report.
Re-processing:
In 2018 the data was reprocessed by Aerial Surveys for LINZ relative to the NZVD2016 vertical datum, and supplied as 1:1000 nominal scale (2500 720m high x 480m wide subtiles per full NZ Topo50 sheet). Lakes and large rivers were hydroflattened in the Bare Earth Digital Elevation Model. The deliverables to LINZ were:
1m gridded bare earth digital elevation model (DEM)
1m gridded digital surface model (DSM)
Classified point cloud
Reprocessed Point Cloud Data was reclassified by LINZ, points classified as 3 - Above Ground were reclassifed to 1 - Unassigned.
Classification of the Point Cloud available on Open Topography are as follows;
1 - Unassigned
2 - Ground
- Hierarchy level
- Dataset
- Other
-
dataset
Reference System Information
- Reference system identifier
- 2193
Metadata constraints
- Use limitation
-
Copyright of this work is owned by Toitū Te Whenua Land Information New Zealand
© LINZ
- Use constraints
- Copyright
Metadata constraints
- Use limitation
-
Released by LINZ under Creative Commons Attribution 4.0 International (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0"
For details see https://www.linz.govt.nz/data/licensing-and-using-data/attributing-linz-data
- Use constraints
- License
Metadata
- Metadata identifier
- b51eb882-6df6-80d4-020f-c523096bf6c8
- Language
- English
- Character encoding
- UTF8
- Contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
Type of resource
- Resource type
- Dataset
- Name
-
dataset
- Date info (Revision)
- 2019-02-18
Metadata standard
- Title
-
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
- Edition
-
1.1