•   Search
  •   Map
  •   Sign in

NZ Cadastral Survey Network Marks

This layer provides all marks and associated information that have an order of 6 or better.

Cadastral surveys are required to connect to these marks if they are within a specified distance.


A cadastral survey network mark is a node which is (or was) occupied by a physical survey monument that meets accuracy standards suitable for cadastral requirements. i.e. Cadastral Survey Network Marks have a NZGD2000 horizontal coordinate order of 6 or better. The complete definition for these mark orders is defined by the following Standard.

" http://www.linz.govt.nz/survey-titles/cadastral-surveying/cadastral-standards/DocumentSummary.aspx?document=27 3"


When a new cadastral survey network mark is named as part of a cadastral survey dataset (plan) its name consists of a mark type and number that is unique to that survey, followed by the plan number e.g. IS I DP 3456; IS II DP3456.

Simple

Identification info

Date (Creation)
2011-04
Purpose

This layer provides all marks and associated information that have an order of 6 or better. Cadastral surveys are required to connect to these marks if they are within a specified distance.

Status
On going
Point of contact
Role Organisation Electronic mail address
Point of contact

LINZ - Land Information New Zealand

info@linz.govt.nz

Spatial representation type
Vector
Topic category
  • Geoscientific information

Extent

N
S
E
W


Maintenance and update frequency
Weekly

Resource format

Title

*.xml

Date
Edition

Unknown

ANZLIC Jurisdictions
  • New Zealand

Resource constraints

Classification
Unclassified

Resource constraints

Use limitation

Crown copyright reserved

Use constraints
Copyright

Resource constraints

Use limitation

Released under Creative Commons By with:


Following Disclaimers:

1. This data is made available through the LINZ Data Service and is based on information contained with Landonline (New Zealand's Official Title and Cadastral System)


2. Not to be used for in defining legal parcel boundaries


Following Attribution:

If you publish, distribute or otherwise disseminate this work to the public without adapting it, the following attribution to Land Information New Zealand should be used:

'CC-By Land Information New Zealand’


If you adapt this work in any way or include it in a collection, and publish, distribute or otherwise disseminate that adaptation or collection to the public, the following attribution to Land Information New Zealand should be used:

‘Contains data sourced from Land Information New Zealand under CC-By.'


If "attribution stacking" problems exist then the requirement to display the above attribution statements is waived and in lieu the attribution statement is to be made in any terms or conditions associated with the work/ product/ application/ etc.

Use constraints
License
Language
English
Character encoding
UTF8

Distribution Information

OnLine resource

https://data.linz.govt.nz/layer/50777-nz-cadastral-survey-network-marks/

Resource lineage

Statement

In 1876-77, J T Thomson (first NZ Surveyor General) decided on the system of plane triangulation and coordinates for all New Zealand to address surveying inaccuracies of the time and his meridional circuit system was implemented over New Zealand in 1877. This standardised the process that had previously been introduced in different provinces.


For each meridional circuit a single triangulation network provided major and minor reference stations with plane coordinates which were related to a zero value for the initial station. The coordinate system was a means to define the position of points for which two values were required. These comprised a distance, in links, north or south of the initial station together with a distance, in links, east or west of the initial station. Note 100 links is equal to 1 chain (20.12 metres). The coordinate axes extended north, south, east and west to the edge of the circuit boundaries.


The major disadvantage with the plane triangulation system was that errors were introduced due to the earth’s curvature. These errors which become more apparent when surveys crossed over into adjacent meridional circuit. To accommodate the shape of the earth the geodetic 1949 datum (NZGD49) was established which enabled the network of 'Trigs' (derived from Trigonometric station) which are still commonly identifiable by a black and white beacon situated above the mark. These trigs extended the primary network and enabled the exact bearing relationship between each different meridional circuit to be calculated. This data was captured into the 'Geodetic database in the 1980's.


Between the trigs a network of survey traverse marks have long been placed, observed and measured to as part of both geodetic surveying and cadastral surveying. These additional (low order) control marks commonly form the framework to which cadastral boundaries are connected to.


A new datum was implemented for New Zealand in 2000. The adoption of NZGD2000 (i.e. the replacement of NZGD49) has allowed closer integration with international coordinate frameworks and navigation systems. In particular, NZGD2000 coincides almost exactly with WGS84, which is the datum supporting the Global Positioning System. This enables GPS-derived coordinates to be used directly with NZGD2000 in most circumstances and was a logical choice for Landonline. The implementation of NZGD2000 required new and existing marks to be surveyed in terms of the new datum.


The historical concept of 'orders' was retained with six geodetic orders, from Zero Order (most accurate) to the Fifth Order (least accurate). Mark that were resurveyed or had their positions re-calculated (by capturing existing observed data) had a new order assigned which was a function of the standard (primarily accuracy)of the observation and the order of other control it was connected to. Other coordinates for other existing (1949) control marks were transformed and assigned a low order. The Geodetic database continues to manage many aspects relating to these marks but is linked to Landonline. Geodetic marks thus receive Landonline orders that reflect their new positional accuracies. In addition to Landonline incorporating the geodetic data, a large amount of survey control information was captured off survey plans in pre-designated survey capture areas thus enhancing the number of marks that can be used for cadastral control (6th Order). Subsequent geodetic contracts continually place and upgrade marks in the control networks along with other suitable survey marks from cadastral surveys.

In 2010 new accuracy standards were set by the Surveyor General, and some 5th order marks whose positions were originally based on data capture of old (traverse) data were downgraded to 6th order.


Most non-boundary marks that are included in new cadastral surveys that are not already geodetic control marks are intended to achieve 6th order and therefore become cadastral survey network marks.

Hierarchy level
Dataset
Other

dataset

Reference System Information

Reference system identifier
urn:ogc:def:crs:EPSG::4167

Metadata constraints

Classification
Unclassified

Metadata constraints

Use limitation

Crown copyright reserved

Use constraints
Copyright

Metadata constraints

Use limitation

Released under Creative Commons By

Use constraints
License

Metadata

Metadata identifier
922ac307-481a-d2aa-a129-90f3cec7ce86

Language
English
Character encoding
UTF8
Contact
Role Organisation Electronic mail address
Resource provider

LINZ - Land Information New Zealand

info@linz.govt.nz

Type of resource

Resource type
Dataset
Name

dataset

Date info (Revision)
2012-01-28

Metadata standard

Title

ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata

Edition

1.1

 
 

Spatial extent

N
S
E
W


Keywords

ANZLIC Jurisdictions
New Zealand

Provided by

Access to the catalogue
Read here the full details and access to the data.


  •   About
  •   Github
  •