Tasman - Motueka River Valley LiDAR 1m DSM (2018-2019)
This layer contains the DSM for LiDAR data in the Tasman Region including Motueka River Valley and surrounding area captured between 2018 and 2019.
- The DEM is available as layer [Tasman - Motueka River Valley LiDAR 1m DEM (2018-2019)]( https://data.linz.govt.nz/layer/1048 11).
- The index tiles are available as layer [Tasman - Motueka River Valley LiDAR 1m Index Tiles (2018-2019)]( https://data.linz.govt.nz/layer/1048 13).
- The LAS point cloud and vendor project reports are available from [OpenTopography]( https://portal.opentopography.org/datasets?loc=New%20Zealand ).
LiDAR was captured for Tasman District Council by Aerial Surveys from 15 November 2018 to 13 February 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.
Data comprises:
- DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
Pulse density specification is at a minimum of 2.17 pulses/square metre.
Vertical datum is NZVD2016.
Simple
Identification info
- Date (Creation)
- 2018-11-15
- Status
- Completed
- Point of contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
- Spatial representation type
- Grid
Spatial resolution
Equivalent scale
- Denominator
- 1000
- Topic category
-
- Elevation
Extent
- Geographic identifier
-
nzl
- Title
-
ANZMet Lite Country codelist
- Date (Publication)
- 2009-03-31
- Edition
-
Version 1.0
- Edition date
- 2009-03-31
- Citation identifier
- http://asdd.ga.gov.au/asdd/profileinfo/anzlic-country.xml#Country
- Cited responsible party
-
Role Organisation Electronic mail address Custodian ANZLIC the Spatial Information Council
Extent
))
- Maintenance and update frequency
- Not planned
Resource format
- Title
-
*.xml
- Date
- Edition
-
Unknown
- ANZLIC Jurisdictions
-
-
New Zealand
-
Resource constraints
- Classification
- Unclassified
Resource constraints
- Use limitation
-
Copyright in this work is owned by Tasman District Council
© Tasman District Council
- Use constraints
- Copyright
Resource constraints
- Use limitation
-
Released by LINZ under Creative Commons Attribution 4.0 New Zealand (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed by Tasman District Council, for re-use under CC BY 4.0."
For details see: https://www.linz.govt.nz/data/licensing-and-using-data/attributing-elevation-or-aerial-imagery-data
- Use constraints
- License
- Language
- English
- Character encoding
- UTF8
Resource lineage
- Statement
-
Data Acquisition:
Airborne Laser Scanner (ALS) data was acquired from a fixed wing aircraft on: 15th, 20th, 22nd, 29th, 30th Nov 2018, 7th Dec 2018, 15th Jan 2019, 13th Feb 2019, using Aerial Surveys Optech Orion H300 LiDAR system.
Survey Specification:
- Scanner: Optech Orion H300
- Flying Height: 1300 m AMGL
- Scan Angle: ±30.0 degrees
- Scan Frequency: 41.5 Hz
- Pulse Rate: 100 kHz
- Swath Overlap: 35%
- Points Per Square Metre: 2.17
Data Processing:
The LiDAR sensor positioning and orientation (POS) was determined using the collected GPS/IMU datasets and Applanix POSPac software.
Base Station: PP-RTX
Sounds Surveying Ltd field surveyed check sites that were used to verify the accuracy of the
processed ground dataset
The POS data was combined with the LiDAR range files and used to generate LIDAR point clouds in NZTM and ellipsoidal heights. This process was undertaken using Optech LMS LiDAR processing software. The data was checked for completeness of coverage. The relative fit of data in the overlap between strips was also checked.
Please refer to survey reports for height accuracy summary statistics.
The positional accuracy of the LiDAR data has been checked by overlaying Sounds Surveying Ltd surveyed data over the LiDAR data displayed coded by intensity. The data was found to fit well in position.
The point cloud data was then classified withTerraSolid LiDAR processing software into ground and above ground returns using automated routines tailored to the project landcover and terrain.
All product deliverables supplied in terms of NZTM map projection and NZVD2016 vertical datum.
Classification of the point cloud followed the classification scheme below:
1 - Unclassified
2 - Ground
3 - Low Vegetation
4 - Medium Vegetation
5 - High Vegetation
6 - Building
7 - Low Noise
9 - Water
18 - High Noise
Lakes and large rivers were hydroflattened in the Bare Earth Digital Elevation Model.
The deliverables to LINZ were:
1m gridded bare earth digital elevation model (DEM)
1m gridded digital surface model (DSM)
Classified point cloud
- Hierarchy level
- Dataset
- Other
-
dataset
Reference System Information
- Reference system identifier
- 2193
Metadata constraints
- Use limitation
-
Copyright of this work is owned by Toitū Te Whenua Land Information New Zealand
© LINZ
- Use constraints
- Copyright
Metadata constraints
- Use limitation
-
Released by LINZ under Creative Commons Attribution 4.0 International (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0"
For details see https://www.linz.govt.nz/data/licensing-and-using-data/attributing-linz-data
- Use constraints
- License
Metadata
- Metadata identifier
- 343784bf-53ee-7a5f-a6d6-47b87f6fbd7a
- Language
- English
- Character encoding
- UTF8
- Contact
-
Role Organisation Electronic mail address Point of contact Toitū Te Whenua Land Information New Zealand
Type of resource
- Resource type
- Dataset
- Name
-
dataset
- Date info (Revision)
- 2020-12-10
Metadata standard
- Title
-
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
- Edition
-
1.1