This layer contains the DSM for LiDAR data in the Waikato Region covering Reporoa Township and the Upper Piako River captured in 2019. - The DEM is available as layer [Waikato - Reporoa and Upper Piako River LiDAR 1m DEM (2019)](https://data.linz.govt.nz/manage/data/layers/104108). - The index tiles are available as layer [Waikato - Reporoa and Upper Piako River LiDAR Index Tiles (2019)](https://data.linz.govt.nz/manage/data/layers/104170). - The LAS point cloud and vendor project reports are available from [OpenTopography](http://opentopo.sdsc.edu/datasets). LiDAR was captured for Lincoln Agritech Limited by Aerial Surveys in April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout Pulse density specification is at a minimum of 2 pulses/square metre. Vertical datum is NZVD2016.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground Data Dictionary for height_pnt: https://docs.topo.linz.govt.nz/data-dictionary/tdd-class-height_pnt.html Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series. Further information on Topo50: http://www.linz.govt.nz/topography/topo-maps/topo50

This layer contains the DEM for LiDAR data for Palmerston North, Ashhurst, Longburn and the surronding area in 2018. - The DSM is available as layer [Manawatu-Whanganui - Palmerston North LiDAR 1m DSM](https://data.linz.govt.nz/layer/104503). - The index tiles are available as layer [Manawatu-Whanganui - Palmerston North LiDAR 1m Index Tiles](https://data.linz.govt.nz/layer/104504). - The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?loc=New%20Zealand). LiDAR was captured for Palmerston North City Council by AAM New Zealand from 29 August to 28 September 2018. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout Pulse density specification is at a minimum of 8 pulses/square metre. Vertical Accuracy Specification is +/- 0.1m (95%) Horizontal Accuracy Specification is +/- 0.5m (95%) Vertical datum is NZVD2016

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level. Data Dictionary for contour: https://docs.topo.linz.govt.nz/data-dictionary/tdd-class-contour.html This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale. Further information on Topo250: http://www.linz.govt.nz/topography/topo-maps/topo250

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground Data Dictionary for height_pnt: http://apps.linz.govt.nz/topo-data-dictionary/index.aspx?page=class-height_pnt This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale. Further information on Topo250: http://www.linz.govt.nz/topography/topo-maps/topo250

This layer contains the DSM for LiDAR data for Marlborough captured between 10 February 2020 and 15 February 2022. - The DEM is available as layer [Marlborough LiDAR 1m DEM (2020-2022)](https://data.linz.govt.nz/layer/105911). - The index tiles are available as layer [Marlborough LiDAR Index Tiles (2020-2022)](https://data.linz.govt.nz/layer/105910). - The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?search=new%20zealand). LiDAR was captured for Marlborough District Council by Aerial Surveys between 10 February 2020 and 15 February 2022. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout. - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout. - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout. Pulse density specification is at a minimum of 4 pulses/square metre. Vertical Accuracy Specification is +/- 0.2m (95%) Horizontal Accuracy Specification is +/- 1.0m (95%) Vertical datum is NZVD2016.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level. Data Dictionary for contour: http://apps.linz.govt.nz/topo-data-dictionary/index.aspx?page=class-contour This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000. For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series. Further information on Topo50: http://www.linz.govt.nz/topography/topo-maps/topo50

This layer contains the DSM for LiDAR data in the Kapiti District and includes Kapiti coast, Paraparaumu, Paekākāriki, Ōtaki and the surrounding area captured in 2021. - The DEM is available as layer [Kapiti Coast LiDAR 1m DEM (2021)](https://data.linz.govt.nz/layer/106990) - The index tiles are available as layer [Kapiti Coast LiDAR Index Tiles (2021)](https://data.linz.govt.nz/layer/106983) - The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?loc=New%20Zealand) LiDAR was captured for the Kapiti Coast District Council by AAM Ltd from 13 March to 15 March 2021. The dataset was generated by AAM and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiledinto a 1:1,000 tile layout - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout Pulse density specification is at a minimum of 8 pulses/square metre. Vertical Accuracy Specification is +/- 0.1m (95%) Horizontal Accuracy Specification is +/- 0.5m (95%) Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data along the coast of the Otago Region, covering Milton, Catlins, Palmerston, Dunedin, Mosgiel, and Oamaru, captured between the 25 June to 1 October 2021. - The DEM is available as layer [Otago - Coastal Catchments LiDAR 1m DEM (2021)](https://data.linz.govt.nz/layer/109627). - The index tiles are available as layer [Otago - Coastal Catchments LiDAR Index Tiles (2021)](https://data.linz.govt.nz/layer/109629). - The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?search=new%20zealand). LiDAR was captured for Otago Regional Council by AAM Ltd between 25 June to 1 October 2021. These datasets were generated by AAM and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout Pulse density specification is at a minimum of 4 pulses/square metre. Vertical Accuracy Specification is +/- 0.2m (95%) Horizontal Accuracy Specification is +/- 1.0m (95%) Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Otago Region for Dunedin and Mosgiel, captured on 24 June 2021. - The DSM is available as layer [Otago - Dunedin and Mosgiel LiDAR 1m DSM (2021)](https://data.linz.govt.nz/layer/107705). - The index tiles are available as layer [Otago - Dunedin and Mosgiel LiDAR Index Tiles (2021)](https://data.linz.govt.nz/layer/107706). - The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?search=new%20zealand). LiDAR was captured for Otago Regional Council by AAM Ltd on 24 June 2021. These datasets were generated by AAM and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Data comprises: - DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout - Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout Pulse density specification is at a minimum of 8 pulses/square metre. Vertical Accuracy Specification is +/- 0.2m (95%) Horizontal Accuracy Specification is +/- 1.0m (95%) Vertical datum is NZVD2016.